Drawcord Full-Zip Hoodie Factory
Fabric, wash, decoration, branding, and sampling — aligned to your program from first
sketch to bulk delivery.
Customization & Development
Product Details
| Main fabric | 50% cotton, 50% polyester |
|---|---|
| Fabric weight | 330 GSM main fabric; 400 GSM rib |
| Fit | Relaxed hip-length silhouette with dropped shoulders |
| Design details | Drawcord hood, full zipper, split kangaroo pockets, rib cuffs and structured rib hem |
| Suitable for | Loungewear, casualwear, travel, athleisure and coordinated sets |
330 GSM Sweatshirt Knit for Everyday Structure
Cotton Comfort with Polyester Stability
The equal cotton-polyester blend balances the familiar handfeel of cotton with the shape stability provided by polyester. At 330 GSM, the fabric has enough body to support the hood, zipper and front pockets without becoming as rigid as heavyweight woven outerwear. It is suitable for transitional layering and year-round casual collections when the interior finish is selected according to the target climate.
Interior Finish and Seasonal Positioning
No specific inner finish has been provided. The hoodie can be developed with an unbrushed loop-back surface, light brushing or a warmer fleece interior. Each option affects warmth, thickness, shrinkage and final handfeel and should be confirmed before sampling and bulk fabric booking.
Drawcord Hood and Neckline Construction
The hood uses long tonal drawcords that allow the opening to be adjusted without adding strong contrast hardware. Hood depth, front overlap and neckline circumference should be approved together so the hood sits smoothly when lowered and provides practical coverage when raised.
Drawcord exits should remain symmetrical and securely reinforced. Cord length, diameter, end finish and color can be customized according to the branding direction, while the hood attachment seam should remain flat without twisting around the neckline.
Full-Zip Front and Center Alignment
The center zipper allows the hoodie to be worn open as a lightweight layer or fully closed as a sweatshirt jacket. Zipper tape and knit fabric may respond differently during sewing, so stabilization and balanced machine tension are important for preventing waviness along the front opening.
Both zipper sides should remain equal in length, with the collar edge, pocket line and lower hem meeting at the same level. Zipper tape color, tooth finish and puller design can be adjusted during trim development.
Split Kangaroo Pockets and Front Balance
The traditional kangaroo pocket is divided by the center zipper into two practical hand pockets. Pocket height, opening angle and left-to-right symmetry should be reviewed on the complete garment so both sides remain balanced and easy to access.
Reinforcement at the upper pocket corners helps manage repeated pulling, while controlled seam allowance reduces unnecessary bulk around the front waist. Pocket depth can be revised according to the intended garment length and size range.
400 GSM Rib Cuffs and Lower-Hem Recovery
The heavier rib quality provides stronger recovery at the wrists and lower opening than the 330 GSM body fabric. Cuff circumference, rib extension and sleeve length should be approved together so the sleeves gather evenly without creating excessive pressure.
The lower rib band controls the relaxed body volume and gives the hoodie a clean stopping point around the hip. Attachment tension should remain consistent across the front, sides and back so the hem stays level rather than twisting or riding upward.
Matching-Set and Casual Layering Applications
This full-zip hoodie can be paired with matching cuffed sweatpants, relaxed shorts or wide-leg lounge pants using the same butter-yellow fabric and rib quality. It can also be layered over tanks, fitted tees and activewear pieces for travel and everyday styling.
Custom Options for Private Label Programs
Private label full-zip hoodie development may include:
- Alternative cotton-polyester ratios, weights and inner finishes
- Custom hood depth, drawcords, eyelets and cord-end treatments
- Adjustments to shoulder width, sleeve volume and body length
- Metal, nylon or molded zippers with custom puller designs
- Embroidery, printing, appliqué or tonal raised logo applications
- Matching bottoms, care labels, hangtags and branded packaging
Sample approval should confirm the hood proportion, zipper alignment, pocket symmetry, cuff recovery, lower-hem tension and post-wash measurements before bulk cutting begins.
Frequently Asked Questions
Is the hoodie brushed inside?
No interior finish has been specified. Loop-back, lightly brushed or fleece-backed options can be selected during fabric development.
Can the drawcord hood be produced without metal eyelets?
Yes. Reinforced stitched openings, metal eyelets or drawcord-free hood constructions can be selected according to the required styling direction.
Can the zipper and pocket design be customized?
Yes. Zipper type, puller finish, pocket depth, opening angle and front construction can be revised during sample development.
What should be approved before manufacturing?
Confirm the fabric handfeel, interior finish, hood shape, drawcord length, zipper stability, pocket symmetry, rib recovery, shrinkage and finished measurements.
Confirming Zipper Alignment Before Hood and Bulk Measurements Are Released
Review the sample for hood proportion, drawcord position, shoulder balance, zipper operation, pocket alignment, sleeve volume, cuff recovery and lower-hem tension. For sampling and quotation, provide the target quantity, size range, preferred fit, interior finish, zipper requirements, color standard, branding details and any available technical files.
